MasterFix Normal Glue for Wallpapers 125 gr.

MasterFix Normal Glue for Wallpapers 125 gr.
Μάρκα: Alma Home Ltd.
Κωδικός Προϊόντος: MasterFix Normal Glue
Διαθεσιμότητα: Διαθέσιμο
Τιμή: 3,20€
Άνευ ΦΠΑ: 3,20€
Ποσότητα:     - Ή -   Επιθυμητό
Σύγκριση

MasterFix Normal – Polymer glue for wallpapers

 

DESCRIPTION

MasterFix® Normal is a polymer glue for wallpapers designed specifically for comfort and quality work for bonding of different weight and density wall coverings. Dissolves rapidly and completely in water. Ready for use after 3 minutes.

 

APPLICATION

Bonding of:

  • ordinary wallpapers
  • novamura (Foam Polyethylene)
  • volume vinyl coatings
  • embossed wallpapers
  • heavily embossed wallpapers

BENEFITS

  • Super fast and easy preparation
  • Reliable and long lasting results
  • Contains a fungicide that inhibits the growth of mold
  • Easy slide of wallpaper for perfect fit the shapes
  • Easy sliding of wallpaper for perfectly fitting the shapes

SPECIFICATIONS

Characteristic

Unit

Value

Appearance

 

cream-colored flakes

Chemical structure

 

A combination of specially selected polymers

Water Content

mg/g

50 ÷ 100

Viscosity

mPa.s

6000 ÷ 11000

pH

 

10 ÷ 11.5

Alkalinity

 

5 ÷ 9 μmol H+/0.04 g; < 0.5 mg NaOH/g

Volume of swelling

ml

≥ 280

Sieve analysis

 

250 ÷ 725 mg/g on a sieve with a clearance 1 mm

≤ 70 mg/g on a sieve with a clearance 250 µm

Bulk density

 

250 ÷ 350 kg/m3

MODE OF OPERATION

Surface preparation
Surfaces must be clean, degreased, dust free and without any contaminants that may impair adhesion. Tools must be clean, dry and degreased.

Priming
For slightly rough surfaces and fine cracks, fill with Master® Gold Bond, joints treated with MasterCryl® Acrylic. To improve adhesion, priming surfaces with a solution of MasterFix® Normal as described in the table below and let them dry completely before placing the wallpaper.

Preparation of adhesive solution
Measure the amount of cold water (as described in the table below), then slowly pour the contents of the package in water for 1 minute, stirring constantly. Leave the mixture for about 3 minutes, then stir vigorously to produce a homogeneous solution. The adhesive is ready for application.

Application
MasterFix® Normal is ready for use after dissolving in water. Apply by brush or roller on the wallpaper.

Preparation of solutions and coverage

Use

Ratio Glue / Water

Glue gr.

L. Water

Area m2

Number of rolls

Primer

1 : 45

125

5,5

55

 

Ordinary wallpapers

1 : 32,5

125

4

25 ÷ 30

5 ÷ 6

Vinyl wallpapers

1 : 27,5

125

3,5

25

5

Novamura

1 : 22,5

125

2,8

20

4

Embossed wallpapers

1 : 22,5

125

2,8

20

4

Volumetric vinyl wallpapers

1 : 22,5

125

2,8

10 ÷ 15

2 ÷ 3

Heavily embossed wallpapers

1 : 17,5

125

2,2

7,5 ÷ 12,5

1,5 ÷ 2,5

TIPS

  • For better adhesion is recommended priming with solution on the basis of the adhesive as described in the above table. Do not use prepared for priming solution for direct bonding of wallpapers. In the event that has remained unused for priming solution, it can add to make the liquid for preparing an adhesive solution, respecting the proportions glue / fluid.
  • Follow strictly indication of gradually pouring the glue in water with constant stirring. Do not at once pour entire contents of package.
  • Stir well adhesive solution after waiting for the saturation of the mixture of 3 minutes before applying glue on wallpaper.
  • For application by roller is recommended to use a sponge roller.
  • When applying the glue with a brush, carrying the material uniformly over the entire surface with cross arm movements. Do not apply a thick layer of glue.
  • Best results are achieved at a temperature of operation about +20oC and relative humidity around 50%.

ATTENTION!

  • Store product in tightly closed packages in a cool, dry place.
  • Packaging is designed for storage of absorbent products, but proper storage is essential.

 

Powered By OpenCart
Το καλύτερο ηλεκτρονικό κατάστημα στην Ελλάδα © 2018.